Compatible with HB-Line: Bi Level Motion Sensor
1. If you want to send a setting, it will only work if the remote control is on. If you don’t press any button within 10 seconds, the indicator light will go out.
2. When using “ON/OFF” button, the rest buttons except the “ON/OFF”, “BRIGHTNESS” and “SEND” buttons will be disabled.
3. When using “TEST” button, the rest buttons except the “TEST”, “SENSITIVITY” and “SEND” buttons will be disabled.
4. Every change needs to press “SEND” button, it will be saved.
5. Because of the power supply “DIMMING” ratio difference, when using different power, “BRIGHTNESS” and “STANDBY DIM” adjust percentage of the power
will have difference with the measured power.
6. Light control priority mode: the ON/OFF illumination values of each gear are 10lx/50lx, 30lx/100lx, 50lx/150lx and 100lx/200lx
7. Light threshold mode: The ON/OFF illumination values of each gear is 10lx/30lx/50lx/100lxm, when the light intensity is less than set value and the movement
of someone or an object is induced, the light is turned on to the preset brightness.
Specifications
