Lutron MS-Z101 Maestro 120V-277V, In-Wall Occupancy/Vacancy Sensing 0-10V Dimmer

Maestro 120V-277V, in-wall occupancy/vacancy sensing 0-10V dimmer. Single pole, 3-way or multi-location, 8A max.

Lutron Maestro 0–10 V Dimmer Sensors are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect heat from occupants moving within an area to determine when the space is occupied. The Maestro 0–10 V Dimmer Sensor combines a Maestro 0–10 V Dimmer with an Occupancy or Vacancy Sensor.

Documentation

Features

• Controls 0–10 V- electronic fluorescent ballasts or LED driver load types*

• Passive infrared motion detection with exclusive Lutron XCT Technology for fine motion detection

• 180° sensor field-of-view

• Up to 30 ft × 30 ft (9 m × 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft × 20 ft (6 m × 6 m) [400 ft2 (36 m2)] minor motion coverage

• Occupancy version can be set to auto-on/auto-off or manual-on/auto-off • Vacancy version available to meet CA Title 24 requirements

• Adjustable timeout (1, 5, 15, or 30 minutes)

• Adjustable settings for auto-on light level (occupied level): 100%, 50%, last light level, or locked preset light level

• Adjustable sensitivity level: High, Med, Low, Min

• Off warning fades lights to off over a period of 10 seconds

• Advanced Maestro dimmer features available (locked preset, fade-to-on, and fade-to-off, etc.)

• Adaptive switching algorithm for extended relay life

• Smart ambient light detection (ALD)

• All models have single pole and 3-way capability

• Works with a single standard mechanical 3-way switch or up to 9 companion switches (MA-AS or MSC-AS)*

• High-end trim and low-end trim to adjust maximum and minimum light levels

• Selectable dimming curve—linear or square law

• Miswire and incompatible load alert

Key Design Features - Dimmer

• On a single-tap, lights fade ON or OFF

• On a double-tap, lights go to full ON

• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached

• High-end trim (adjust maximum light level that can be achieved, for energy savings)

• Low-end trim (adjust minimum light level that can be dimmed down, to prevent flickering lights)

*Wallplates are sold separately